eeo
New Member
Posts: 2
|
Post by eeo on Nov 23, 2012 22:32:24 GMT -5
Are there any jetting gurus out there ? I have a 250 X with the typical throttle bog, I have learned to live with it over the last few years but got a new to us 150R today that does it even worse ! Both bikes are stock, Would appreciate any ideas..
|
|
xman
Junior Member
Posts: 5
|
Post by xman on Nov 26, 2012 2:57:13 GMT -5
Sounds like a jetting and air flow problem. These bikes are delivered really lean and choked down from the factory. Try opening the air box, and a JD jet kit. There is also an accelerator pump mod for pre- 2007 models that I've heard helps. My 250x was the same way until I opened up the breathing and jetted the carb. Hope this helps. X-Man
|
|
xman
Junior Member
Posts: 5
|
Post by xman on Nov 26, 2012 3:01:12 GMT -5
|
|